Sersar - commercializzazione di polimeri fluorurati Sersar - commercializzazione di polimeri fluorurati

ELIFLON FKM Bisphenol-curable

RAW COPOLYMERS

Performed for injection molding, compression molding, extrusion

C10-M00
Very low viscosity copolymer. Suitable to be blended with different grades to improve compound flowability.
C20-M00
Medium-low viscosity copolymer. Excellent mold flow, suitable for injection molding, compression molding and extrusion.
C40-M00
Medium viscosity copolymer. Excellent mold flow, suitable for injection molding, compression molding and extrusion.
C60-M00
Medium-high viscosity copolymer. High mechanical properties, low compression-set values. Excellent mold flow, suitable for injection molding, compression molding and extrusion.
C150-M00
Very high viscosity copolymer. Designed for explosive decompression ED (rapid gas decompression RGD application). Excellent tensile strenght, high elongation, very low compression-set values even at high temperature.

RAW TERPOLYMERS

general purpose

T30-M00
Medium viscosity terpolymer, 68.5 % fluorine. Very fast curing rate. Excellent processability.
T50-M00
Medium-high viscosity terpolymer, 68.5 % fluorine. Very fast curing rate. Excellent processability.

High chemical resistant

T30-H00
Medium-high viscosity terpolymer, 70 % fluorine. High chemical resistance.

PRECOMPOUND COPOLYMERS

P-C20-001
Low viscosity copolymer with cure agents incorporated. This grade offers significant processing ease and it is designed for injection and transfer moulding.
P-C25-002
Low viscosity copolymer with cure agents incorporated. This grade offers significant processing ease and it is designed for injection and transfer moulding.
P-C30-000
Medium-low viscosity copolymer with cure agents incorporated. This grade offers significant processing ease and it is designed for injection and transfer moulding.
P-C40-001
Medium-low viscosity copolymer with cure agents incorporated. This grade offers significant processing ease and it is designed for injection and transfer moulding.

PRECOMPOUND TERPOLYMERSS

P-T30-010
Medium-low viscosity terpolymer with cure agents incorporated. This grade offers significant processing ease and it is designed for injection and transfer moulding.

CURATIVES MASTERBATCHES

Eliflon Curative-1-C
Fluoroelastomer masterbatch 33% by weight of Bisphenol AF {4,4'-[2,2,2-trifluoro-1-(trifluoromethyl) ethylidene]bisphenol} and Ben-zyltriphenylphosphonium salt with 4,4'-[2,2,2-trifluoro-1-(trifluoromethyl)ethylidene]bisphenol (1:1).
Eliflon Curative-1-T
Masterbatch Eliflon CURATIVE 1-T is curative mixture suitable for ionic curable fluorinated elastomers (FKM). It can be utilized as a curative for both di-polymer and ter-polymer types.
Eliflon Curative-2-C
Fluoroelastomer masterbatch 50% by weight of Bisphenol AF {4,4’-[2,2,2-trifluoro-1-(trifluoromethyl) ethylidene]bisphenol}.
Eliflon Curative-3-C
Fluoroelastomer masterbatch 33% by weight of Benzyltri-phenylphosphonium chloride.
Logo Sersar

© 2019 Sersar s.r.l.

Registered Office: Via Vittoria, 1 - 40068 San Lazzaro di Savena (BO) - Italy
Administrative and Operational Headquarters: Via Vittoria, 1 - 40068 San Lazzaro di Savena (BO) - Italy

Telephone: + 39.051.625.5442 | E-mail: info@sersar.net | Fax: + 39.051.625.5442
N.REA BO - 482936 - VAT N. 02987671209 | CAP.SOC. € 250.000 I.V.